Minicom Advanced Systems MINICOM 232 IP User's Guide download pdf (Page 13)

USER GUIDE

9.5 Connecting the power supply

1. Using the Power cord provided, connect the Smart 216 IP to a socket outlet with

grounding connection. Only use the power cord supplied with the unit.

2. Switch on the Smart 216 IP.

10. Setting the IP address

By default, Smart 216 IP boots with an automatically assigned IP address from a

DHCP (Dynamic Host Configuration Protocol) server on the network. The DHCP

server provides a valid IP address, gateway address and subnet mask.

You can identify the IP address from the OSD at the local position. Also where

there is no DHCP server, set the IP address locally via the OSD as follows:

1. From the local keyboard, press Shift twice. The OSD Main window appears.

See Figure 10.

Figure 10 OSD Main window

2. Press F2. The Settings window appears see Figure 11.

Figure 11 Settings window

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 46 47

No comments

Minicom Advanced Systems MINICOM 232 IP User's Guide Page 13